Gorenje ECS8P2 Technical Information PDF herunterladen (Seite 17)

*(…) – SVK7… - 750 mm

**(...) – SVK8... - 850 mm

406342

• Cooking hobs can be installed into worktops that are 30 to 50

mm thick.

• The kitchen furniture element underneath the hob should not

be ﬁ tted with a drawer. If the kitchen furniture element as a

horizontal partition wall, it should be installed no less than 60

Before inserting the appliance into the opening in the kitchen

worktop, the supplied foam gasket must be attached to the lower

side of the glass ceramic (glass) cooking hob (see ﬁ gure above).

Do not install the appliance without the foam gasket!

The gasket should be attached to the appliance in the

following way:

- Remove the protective ﬁ lm from the gasket.

- Then, attach the gasket to the lower side of the glass,

approximately 2-3 millimetres from the edge (as shown in the

ﬁ gure). The gasket must be attached along the entire length of

the glass edge and should not overlap at the corners.

- When installing the gasket, make sure that the glass does not

come into contact with any sharp objects.

NOTE!

On some appliances the gasket is already installed!

Installing the foam

gasket

Worktop cutout

dimensions

1 2 ... 12 13 14 15 16 17 18 19 20

Keine Kommentare

Gorenje ECS8P2 Technical Information Seite 17