Gorenje ECK63CLB Technical Information PDF herunterladen (Seite 15)

425225

be installed no less than 60 millimeters from the lower

surface of the worktop. The space between the partition

wall and the hob must be empty; no objects should be

placed into that gap.

• On the furniture back wall there should be a cutout with

width of at least 175 mm along the entire width of the

furniture element.

• Only type EVP4..,EVP2.., ovens ﬁ tted with a cooling fan

may be installed underneath this cooking hob.

Installation procedure

• The worktop should be installed completely horizontally.

• The cuto surfaces should be appropriately protected.

• Attach the fastening elements (4x - SVK6…600 mm; 6x

- SVK7…750 mm; 6x - SVK8…850 mm) with the supplied

screws (4x - SVK6…600 mm; 6x - SVK7…750 mm; 6x -

SVK8…850 mm) to the left and right wall of the cooking

hob and the worktop cuto .

• Connect the cooking hob to the power mains (see

instructions for connecting a cooking hob on a power

network).

• Insert the cooking hob into he cuto and press it heavily

from above against the worktop.

• For screwing down the ﬁ xing clip it is not allowed to

use screws longer than 6,5 mm.

• Before installing an oven, the rear wall of the kitchen

furniture element should be removed in the area of the

cooking hob cutout.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Gorenje ECK63CLB Technical Information Seite 15